18 GAUGE 30MM BRAD NAILER
2
FASTENER SPECIFICATIONS
SAFETY INSTRUCTIONS
DANGER!
1) Be sure to put goggles on before operation
Since a fastener fired wrongly through careless handling can spring
out or you are always exposed to danger that can be caused by dust
and extraneous substances dispersed by exhausted air, you must
always wear goggles for operation. Goggles should meet requirements of
ANSI Z89.1-1997 and be able to protect both the front and the sides. An
employer has responsibility for having workers and all the other persons
wear protective equipment in a workshop.
2) Put on hearing protective equipment in certain Working environment.
In working environment exposed to loudness which may result in
hearing loss, an employer (management) must provide hearing
0.078"(2mm)