Ronix 4552, Руководство по введению

Страница: 6 / 25

USER MANUAL
5
above mentioned precautions do not guarantee that you will not sustain
white finger disease or carpal tunnel syndrome. Therefore, continual
and regular users should monitor closely the condition of their hands
fingers.
If any of the above symptoms appear, seek medical advice immediately.
- Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and
any damage. Repair or replace as necessary before using the machine.
DO NOT USE any attachment with this power head other than the
ones recommended by our company. Serious injury to the operator or
bystanders could result as well as damage to the machine.
- The blade guard and front handle guard is very important to the
machine. It must be screwed up on the machine before the initial use.
These guards must always be fixed when operating the machine. Check
these guards before each use. If any damage (crack, break, etc.) on the
guard, contact with your dealer for replacing it.
If use of non-conformant replacement guards, or remove or modify
these guards could result in serious injury to the operator or bystanders.
- Keep the handles free from oil and fuel.
- Always use proper handles and shoulder strap when cutting.
- Do not smoke while mixing fuel or filling tank.
- Do not mix fuel in an enclosed room or near open flames. Assure
adequate ventilation.
- Always mix and store the fuel in a properly marked container that is
approved by local codes and ordinances for such usage.
- Never remove the fuel tank cap while the engine is running.
- Never start or run the engine inside a closed room or building. Exhaust
gas contain dangerous carbon monoxide.
- Never attempt to make engine adjustments while the unit is running
and strapped to the operator. Always make engine adjustments with the
unit resting on a flat, clear surface.
- Do not use the unit if it is damaged or poorly adjusted. Never remove
the machine’s guard.
- Inspect the area to be cut and remove all debris that could become