Page
9
of
26
Charging the Battery:
(If using Milwaukee Cordless Soldering Iron)
The battery takes approx. 1.5 hrs. to charge.
The charger LED codes are the following:
Standby (Solid Red when battery is charging from full discharge)
Charging (Blinking Green when battery is almost fully charged)
Fully Charged (Solid Green with battery plugged in)
Battery Warnings
•
To charge the battery, you must only use the included charger.
•
Only use included AC power cord.
•
Do not over-discharge the Lithium-Ion battery.
•
Do not store the Battery connected on the device. Remove the battery from the
device when storing the unit.
•
Disconnect a depleted battery, do not leave a dead battery on the device
•
If at any time the Lithium-Ion battery begins to balloon or swell, discontinue
charging or discharging immediately.
•
Always terminate all processes if the battery/charger malfunctions.
•
Do not over charge the battery.
•
Store the Lithium-Ion battery at room temperature in a dry area for best results.
•
Allow the Lithium-Ion Battery to cool to ambient/room temperature before recharging.
•
Never charge the Lithium-Ion battery unattended at any time.
