- 2 -
TABLE OF CONTENTS:
DESCRIPTION
TECHNICAL DATA
IMPORTANT SAFETY INSTRUCTION
KEY PARTS DIAGRAM
INSTRUCTIONS FOR OPERATION
MAINTENANCE
TROUBLESHOOTING
EXPLODED VIEW
PARTS LIST
Description
This VALU-AIR Air-powered Gravity-feed Spray Gun is a TOUCH UP sprayer. This tool applies paint
with less force, reducing the bounce of the material from the surface to be painted. It features a stainless steel
needle and nozzle to accommodate a variety of coatings. The spray gun is capable of forming very large
patterns.
Technical Data
TPYE:
R
Recommended air pressure
3.0-4.0bar
Type of Feed
Gravity
Max. pressure of air
4.0 bar (58psi)
Air inlet
1/4
”
Avg. Air Consumption
3.5-6.0cfm
Standard Nozzle
0.8mm
Pattern Width
110-160mm
Optional Nozzle
0.8,1.0mm
Paint Capacity
125cc plastic cup
Important Safety Instructions
1. For toxic vapors produced by spraying certain materials can create intoxication and
serious damage to health. Always wear safety glasses, gloves and respirator to
prevent the toxic vapor hazard, solvent and pointing paint coming into contact your
eyes or skin. (see fig 1)
2. Never use oxygen, combustible or any other bottle gas as a power source or would
cause explosion and serious personal injury. (see fig 2)
3. Fluid and solvent can be highly flammable or combustible. Pls Use the tool only in
well-ventilated area, and avoid any ignition sources, such as smoking, open flames
and decrial hazard. (see fig 3)
4.Disconnect tool from air supply hose before doing tool maintenance and during
non-operation, for emerge stop and prevention of unintended operation, a ball valve
near the gun to air supply is recommend.
5. Use clean, dry and regulate compressed air rated at 3.0-4.0bar, never exceed
maximum permissive operating pressure 4.0bar (58psi)
(see fig 4)
6. Never use homogenate hydrocarbon solvent, which can chemically react with
aluminum and zinc parts and chemically compatible with Alum. and zinc pats.
7. Never point gun at you and others at any time.
8. Before operating the tool, make sure all the screws & caps are securely tightened in case of leaking;
9. Before painting, make inspection for free movement of trigger and nozzle to insure tool can operate well.
10. Never modify this tool for any other applications. Only use parts, nozzles and accessories recommended
and accessories recommended by manufactures.
1
图表
1
2
3
4
805
