Connection to TV
You can connect the device to a TV set using the TV cable supplied (3.5mm plug to
1x RCA plug). Connect the TV cable to the device and the TV set as shown in the
following illustration and switch the device on. On the TV set, select the AV port in
use as the source. The monitor image will then be displayed directly on the TV set.
Settings for use
Hand loop
The hand loop can be adjusted to the size of your hand. Open the hook and loop,
tighten or untighten the hand loop by shortening or lengthening the ends of the
straps, then close the hook and loop.
The device has a total of three options to sharpen the
presentation of the subject. Switch the night vision device on
via the On/Off button. Like with binoculars, you can set the
optics to suit your personal eyesight by turning on the
eyepiece.
(1) Once you have adjusted the eyepiece to suit your eyesight,
you no longer need to change that setting.
(2) The front lens allows you to adjust the focus by rotating it.
(3) Your night vision device will automatically change to the
infrared model at night. You can also adjust the focus of the
IR beam by rotating it, although the results might not be as
obvious as with the lens focus.
Note:
Avoid aiming your device at strong sources of light like
www.rongland.co.uk
