RH560WIRELESS CMS OPERATION MANUAL
Page 9/15
【
Notice
】：
After installation, the distance between sensor front and hose clamp is 8
‐
10mm.
【
Warning
】
：
The machine should be stopped during installation.
4.5
Announcement for the first time using
When received new equipment, please try to connect with software MOS3000, make sure
the performance is good before installing on machine. Find a try area for installation, when chose
the the position for RH560
‐
WL, please check the wireless communication RSSI value for the
farthest RH505, it requires that each sensor’s RSSI value should not lower than 20.
5. Equipment operating
5.1
Summarize
This system belongs to professional equipment, it requires for basic skills of the operators, in
order to ensure safe, correct and efficient using of this equipment, please read this manual
carefully before operating.
5.2
Announcements
After installation and configuration, please pay attention to the following:
Check the connection of power supply and earth wiring.
Check each component parameter setting.
Check the equipment fixing.
Make sure the working environment is suitable for the equipment.
【
Warning
】：
Please follow this manual strictly to operate this equipment, make sure all of the
steps were finished correctly.
5.3
RH560-WL Switch and LED description
Open RH560
‐
WL cabinet cover, there is a switch with ON and OFF mark on main board, it is
power switch.
There are three indicators on RH560
‐
WL, they are RUN (power indicator), COM
(communication indicator) and ERR (error indicator):
Indicat
ors
Status
Description
RUN
On
Power on
Off
Power off
