Ronde & Schwarz R&S FPL1000, Руководство пользователя

Страница: 927 / 1076

Remote Commands
R&S
®
FPL1000
927 User Manual 1178.3370.02 ─ 09
11.9.3 Storing and Loading Instrument Settings
See also:
●
INSTrument[:SELect]
on page 622 to select the channel setup.
MMEMory:CLEar:ALL
.....................................................................................................927
MMEMory:CLEar:STATe
................................................................................................. 927
MMEMory:LOAD:AUTO
..................................................................................................927
MMEMory:LOAD:STATe
..................................................................................................928
MMEMory:LOAD:TYPE
.................................................................................................. 929
MMEMory:STORe<1|2>:STATe
....................................................................................... 930
MMEMory:STORe<1|2>:STATe:NEXT
..............................................................................930
MMEMory:STORe<1|2>:TYPE
........................................................................................ 931
SYSTem:PRESet
........................................................................................................... 931
SYSTem:PRESet:CHANnel[:EXEC]
................................................................................. 931
MMEMory:CLEar:ALL
This command deletes all instrument configuration files in the current directory.
You can select the directory with
MMEMory:CDIRectory
on page 920.
Example: MMEM:CLE:ALL
MMEMory:CLEar:STATe <1>, <FileName>
This command deletes an instrument configuration file.
Parameters:
<1>
<FileName> String containing the path and name of the file to delete.
The string may or may not contain the file's extension.
Example: MMEM:CLE:STAT 1,'TEST'
MMEMory:LOAD:AUTO <1>, <FileName>
This command restores an instrument configuration and defines that configuration as
the default state.
The default state is restored after a preset (
*RST
) or after you turn on the
R&S FPL1000.
Parameters:
<1>
<FileName> 'Factory'
Restores the factory settings as the default state.
'<file_name>
String containing the path and name of the configuration file.
Note that only
instrument settings files can be selected for the
startup recall function; channel setup files cause an error.
Managing Settings and Results