Ronde & Schwarz R&S FPL1000, Руководство пользователя

Страница: 924 / 1076

Remote Commands
R&S
®
FPL1000
924 User Manual 1178.3370.02 ─ 09
11.9.2 Selecting the Items to Store
The following commands select the items to be included in the configuration file.
Depending on the used command, either the items from the entire instrument
(
MMEMory:SELect[:ITEM]...
), or only those from the currently selected channel
setup (
MMEM:SELect:CHANnel[:ITEM]...
) are stored.
MMEMory:SELect:CHANnel[:ITEM]:ALL
...........................................................................924
MMEMory:SELect[:ITEM]:ALL
......................................................................................... 924
MMEMory:SELect:CHANnel[:ITEM]:DEFault
.....................................................................924
MMEMory:SELect[:ITEM]:DEFault
................................................................................... 924
MMEMory:SELect:CHANnel[:ITEM]:HWSettings
............................................................... 925
MMEMory:SELect[:ITEM]:HWSettings
..............................................................................925
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL
................................................................. 925
MMEMory:SELect[:ITEM]:LINes:ALL
................................................................................925
MMEMory:SELect:CHANnel[:ITEM]:NONE
....................................................................... 925
MMEMory:SELect[:ITEM]:NONE
..................................................................................... 925
MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram
............................................................ 926
MMEMory:SELect:CHANnel[:ITEM]:SGRam
.....................................................................926
MMEMory:SELect[:ITEM]:SPECtrogram
...........................................................................926
MMEMory:SELect[:ITEM]:SGRam
................................................................................... 926
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive]
.........................................................926
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
.............................................................926
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL
....................................................... 926
MMEMory:SELect[:ITEM]:TRANsducer:ALL
......................................................................926
MMEMory:SELect:CHANnel[:ITEM]:ALL
MMEMory:SELect[:ITEM]:ALL
This command includes all items when storing or loading a configuration file.
The items are:
●
Hardware configuration:
MMEMory:SELect[:ITEM]:HWSettings
on page 925
●
Limit lines:
MMEMory:SELect[:ITEM]:LINes:ALL
on page 925
●
Spectrogram data:
MMEMory:SELect[:ITEM]:SGRam
on page 926
●
Trace data:
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 926
●
Transducers:
MMEMory:SELect[:ITEM]:TRANsducer:ALL
on page 926
Example: MMEM:SEL:ALL
Manual operation: See "Items:" on page 463
MMEMory:SELect:CHANnel[:ITEM]:DEFault
MMEMory:SELect[:ITEM]:DEFault
This command selects the current settings as the only item to store to and load from a
configuration file.
Manual operation: See "Items:" on page 463
Managing Settings and Results