![Ronde & Schwarz R&S FPL1000 Скачать руководство пользователя страница 793](http://html1.mh-extra.com/html/ronde-and-schwarz/rands-fpl1000/rands-fpl1000_user-manual_1484989793.webp)
Remote Commands
R&S
®
FPL1000
793
User Manual 1178.3370.02 ─ 09
Example:
SYST:COMM:RDEV:PMET2:DEF '','NRP-Z81','',
'123456'
Assigns the power sensor with the serial number '123456' to the
configuration "Power Sensor 2".
SYST:COMM:RDEV:PMET2:DEF?
Queries the sensor assigned to "Power Sensor 2".
Result:
'','NRP-Z81','USB','123456'
The NRP-Z81 power sensor with the serial number '123456' is
assigned to the "Power Sensor 2".
Manual operation:
See
Configuring Power Sensor Measurements
CALibration:PMETer<p>:ZERO:AUTO ONCE
................................................................... 793
CALCulate<n>:PMETer<p>:RELative[:MAGNitude]
............................................................794
CALCulate<n>:PMETer<p>:RELative[:MAGNitude]:AUTO ONCE
....................................... 794
CALCulate<n>:PMETer<p>:RELative:STATe
.....................................................................794
[SENSe:]PMETer<p>:DCYCle[:STATe]
............................................................................. 795
[SENSe:]PMETer<p>:DCYCle:VALue
...............................................................................795
................................................................................... 796
[SENSe:]PMETer<p>:FREQuency:LINK
........................................................................... 796
...........................................................................................796
[SENSe:]PMETer<p>:MTIMe:AVERage:COUNt
.................................................................797
[SENSe:]PMETer<p>:MTIMe:AVERage[:STATe]
................................................................ 797
[SENSe:]PMETer<p>:ROFFset[:STATe]
............................................................................798
........................................................................................ 798
..........................................................................................798
[SENSe:]PMETer<p>:UPDate[:STATe]
..............................................................................799
..........................................................................................799
................................................................................ 799
CALibration:PMETer<p>:ZERO:AUTO ONCE
This command zeroes the power sensor.
Note that you have to disconnect the signals from the power sensor input before you
start to zero the power sensor. Otherwise, results are invalid.
Suffix:
<p>
.
Power sensor index
Example:
CAL:PMET2:ZERO:AUTO ONCE;*WAI
Starts zeroing the power sensor 2 and delays the execution of
further commands until zeroing is concluded.
Usage:
Event
Manual operation:
See
Setting Basic Spectrum RF Measurement Parameters