Ronde & Schwarz R&S FPL1000, Руководство пользователя

Страница: 612 / 1076

Remote Commands
R&S
®
FPL1000
612 User Manual 1178.3370.02 ─ 09
11 Remote Commands
The commands required to perform measurements in the Spectrum application in a
remote environment are described here.
Compatibility with former R&S signal and spectrum analyzers
As a rule, the R&S FPL1000 supports most commands from previous R&S signal and
spectrum analyzers such as the FSQ, FSP, FSU, or FSV. However, the default values,
in particular the number of sweep points or particular bandwidths, may vary. Therefore,
the R&S
FPL1000 can emulate these other devices, including their default values, in
order to repeat previous measurements or support existing control applications as in
legacy systems.
● Conventions Used in SCPI Command Descriptions ............................................. 612
● Common Suffixes ..................................................................................................613
● Common Commands ............................................................................................ 613
● Commands for Remote Instrument Operation ...................................................... 617
● Selecting the Operating Mode and Application .....................................................618
● Configuring and Performing Measurements ......................................................... 626
● Remote Commands for Result Displays ............................................................... 749
● Setting Basic Spectrum RF Measurement Parameters ........................................ 758
● Managing Settings and Results ............................................................................ 917
● Configuring the R&S FPL1000 ..............................................................................955
● Emulating Other Instruments' Commands ............................................................ 977
● Using the Status Register ................................................................................... 1010
● Deprecated Commands ...................................................................................... 1022
11.1 Conventions Used in SCPI Command Descriptions
Note the following conventions used in the remote command descriptions:
●
Command usage
If not specified otherwise, commands can be used both for setting and for querying
parameters.
If a command can be used for setting or querying only, or if it initiates an event, the
usage is stated explicitly.
●
Parameter usage
If not specified otherwise, a parameter can be used to set a value and it is the
result of a query.
Parameters required only for setting are indicated as
Setting parameters .
Parameters required only to refine a query are indicated as Query parameters .
Parameters that are only returned as the result of a query are indicated as Return
values .
●
Conformity
Commands that are taken from the SCPI standard are indicated as SCPI con-
firmed . All commands used by the R&S FPL1000 follow the SCPI syntax rules.
Conventions Used in SCPI Command Descriptions