User Interface
R&S
®
GP-U/GP-E/GP-S/GP-T
52
User Manual 3646.3836.02 ─ 01
Click " Activate" in the toolbar at the top of the desktop to apply your configuration
changes.
Backup Export
The "Export" settings allow you to create and export a manual backup of the current
firewall configuration. Use this function, for example, to reload a configuration after a
system update.
Navigate to "Firewall > Backup > Export" to open an editor panel to create and transfer
a manual backup in GP file format to your computer so you can restore the configura-
tion contained in it later if necessary.
The "Export" panel allows you to configure the following elements:
Field
Description
"Encryption Password"
Enter a password for the encryption of the backup
file and confirm it. The password can consist of up
to 32 characters (allowed are letters of the English
alphabet, integers and the special characters
\-][/.,~!@#$%^*()_+:?><}{
).
"Show Password"
Optional: Select this checkbox to verify the pass-
word.
"Use auto backup password"
Optional: Select this checkbox if you want to use the
encryption password set for the creation of auto-
matic backup files (see
on page 49) instead of entering a new one.
If you want to export the backup file, click "Export". Otherwise, click "Cancel" to shut
the editor panel.
Backup Import
The gateprotect Firewall allows you to upload a previously downloaded backup file to
restore the system configuration (e.g. after a new installation).
Navigate to "Firewall > Backup > Import" to load and activate a firewall configuration
from an earlier created backup file.
To upload an automatically created backup file stored on the backup server, you first
have to transfer the backup file from the backup server to your local disk.
The "Import" panel allows you to configure the following elements:
Menu Reference
