Ronde & Schwarz (1309.6830.02 Скачать руководство пользователя страница 37

Страница: 37 / 77

R&S ZVH

Putting into Operation

Configuring the R&S ZVH

Quick Start Guide 1309.6900.12 - 06

1.6.3 Using the GPS Receiver

The R&S ZVH can locate your exact position if you equip it with the R&S HS-Z240
GPS receiver (order no. 1309.6700.02).

● The GPS receiver has to be connected to the AUX port.

GPS reference frequency

Note that the reference frequency is automatically adjusted as soon as the GPS
receiver is enabled and a fix connection with enough satellites is established.

The "Instrument Setup" dialog box provides all settings necessary to configure the
GPS receiver.

In addition, the R&S ZVH shows some information about the GPS connection like the
number of tracked satellites or the signal quality.

Enabling the GPS receiver

► In the "Instrument Setup" dialog box, select the "GPS Function" item.

► Press the ENTER key.

A dropdown menu to turn the GPS receiver on and off opens.

► Turn the GPS receiver on or off as required.

► Confirm the selection with the ENTER key.

When this feature is on, the R&S ZVH is ready to receive GPS data.

Displaying GPS information

► In the "Instrument Setup" dialog box, select the "Show GPS Information" item.

► Press the ENTER key.

A dropdown menu to turn the display of the GPS coordinates on and off opens.

► Turn the display of GPS coordinates on or off as required.

► Confirm the selection with the ENTER key.

Содержание (1309.6830.02














































































Результаты поиска

Содержание (1309.6830.02

Отзывы:

Ronde & Schwarz (1309.6830.02, Быстрый старт, Страница: 37 / 77

Результаты поиска

Содержание (1309.6830.02

Отзывы: