Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 942 / 1071

Remote Commands
R&S
®
FPL1000
942 User Manual 1178.3370.02 ─ 11
HCOPy:TREPort:ITEM:LOGO <FileName>
This command selects a graphic (for example a company logo) that is shown at the top
of each page in the test report.
Use
HCOPy:TREPort:ITEM:LOGO:CONTrol
on page 942 to select the conditions
under which the picture is shown.
Parameters:
<FileName> String containing the location and name of the picture.
You can use the following file types:
bmp
,
jpg
,
png
,
gif
,
emf
or
wmf
format.
Example: HCOP:TREP:ITEM:LOGO 'C:\aPicture.jpg'
Includes a picture at the top of each page of the report.
Manual operation: See "Logo" on page 501
HCOPy:TREPort:ITEM:LOGO:CONTrol <Repetition>
This command selects how often the logo is displayed in the document.
Parameters:
<Repetition> GLOBal
The selected header line is displayed at the top of every page of
the report.
NEVer
The selected header line is displayed on no page of the report.
Note that a line that does not contain anything is still displayed in
the report as a blank line. If you select NEVer, the line is not dis-
played at all.
*RST:
NEVer
Example: HCOP:TREP:ITEM:LOGO 'c:\logo.png'
Selects a picture to be displayed in the report document.
HCOP:TREP:ITEM:LOGO:CONT GLOB
Displays the logo on each page.
Manual operation: See "Visibility" on page 500
HCOPy:TREPort:ITEM:SELect [<ChannelType>],'<Item>,<Item>,<Item>,...'
This command defines the type of information that a test report is made up out of.
Parameters:
<ChannelType> Optional parameter to define the channel type that the selection
applies to.
When you omit the <ChannelType> parameter, the selection
applies to the currently active channel.
<Item> String containing the information you want to include in the test
report.
Managing Settings and Results