Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 904 / 1071

Remote Commands
R&S
®
FPL1000
904 User Manual 1178.3370.02 ─ 11
CALCulate<n>:LIMit<li>:UPPer:THReshold <Limit>
This command defines an absolute limit for limit lines with a relative scale.
The R&S FPL1000 uses the threshold for the limit check, if the limit line violates the
threshold.
Suffix:
<n>
.
irrelevant
<li> Limit line
Parameters:
<Limit> Numeric value.
The unit depends on
CALCulate<n>:LIMit<li>:UNIT
on page 901.
*RST:
-200
Default unit: dBm
Manual operation: See "Threshold" on page 435
10.8.10.2 Managing Limit Lines
Useful commands for managing limit lines described in the R&S FPL1000 User Man-
ual:
●
MMEM:SEL[:ITEM]:LIN:ALL
●
MMEM:STOR:TYPE
Remote commands exclusive to managing limit lines:
CALCulate<n>:LIMit<li>:ACTive?
.....................................................................................904
CALCulate<n>:LIMit<li>:COPY
........................................................................................905
CALCulate<n>:LIMit<li>:DELete
...................................................................................... 905
CALCulate<n>:LIMit<li>:STATe
........................................................................................905
CALCulate<n>:LIMit<li>:TRACe<t>:CHECk
...................................................................... 906
MMEMory:LOAD<n>:LIMit
.............................................................................................. 906
MMEMory:STORe<n>:LIMit
............................................................................................ 906
CALCulate<n>:LIMit<li>:ACTive?
This command queries the names of all active limit lines.
Suffix:
<n>
.
irrelevant
<li> irrelevant
Return values:
<LimitLines> String containing the names of all active limit lines in alphabeti-
cal order.
Example: CALC:LIM:ACT?
Queries the names of all active limit lines.
Setting Basic Spectrum RF Measurement Parameters