Remote Commands
R&S
®
FPL1000
640
User Manual 1178.3370.02 ─ 11
FAIL
Limit check has failed.
<UpperChan>
text value
The state of the limit check for the upper alternate or adjacent
channels.
PASSED
Limit check has passed.
FAIL
Limit check has failed.
Example:
INIT:IMM;*WAI;
CALC:LIM:ACP:ACH:RES?
PASSED,PASSED
Usage:
Query only
CALCulate<n>:LIMit<li>:ACPower:ALTernate<ch>[:RELative]:STATe
<State>[,
<State>]
This command turns the relative limit check for the alternate channels on and off.
You have to activate the general ACLR limit check before using this command with
CALCulate<n>:LIMit<li>:ACPower[:STATe]
.
Suffix:
<n>
.
irrelevant
<li>
irrelevant
<ch>
1..n
Alternate channel number
Parameters:
<State>
ON | OFF | 1 | 0
Relative limit check for lower alternate channel
*RST:
0
<State>
ON | OFF | 1 | 0
Relative limit check for upper alternate channel
*RST:
0
Manual operation:
See
CALCulate<n>:LIMit<li>:ACPower[:STATe]
<State>
This command turns the limit check for ACLR measurements on and off.
Suffix:
<n>
.
irrelevant
<li>
irrelevant
Configuring and Performing Measurements
