Remote Commands
R&S
®
FPL1000
637
User Manual 1178.3370.02 ─ 11
<li>
irrelevant
Return values:
<LowerACH>
text value
Thestate of the limit check for the lower adjacent channels.
PASSED
Limit check has passed.
FAIL
Limit check has failed.
<UpperACH>
text value
The state of the limit check for the upper adjacent channels.
PASSED
Limit check has passed.
FAIL
Limit check has failed.
Example:
INIT:IMM;*WAI;
CALC:LIM:ACP:ACH:RES?
PASSED,PASSED
Usage:
Query only
Manual operation:
See
CALCulate<n>:LIMit<li>:ACPower:ACHannel[:RELative]:STATe
<State>[, <State>]
This command turns the relative limit check for the adjacent channels on and off.
You have to activate the general ACLR limit check before using this command with
CALCulate<n>:LIMit<li>:ACPower[:STATe]
.
Suffix:
<n>
.
irrelevant
<li>
irrelevant
Parameters:
<State>
ON | OFF | 1 | 0
Relative limit check for lower adjacent channel
*RST:
0
<State>
ON | OFF | 1 | 0
Relative limit check for upper adjacent channel
*RST:
0
Manual operation:
See
CALCulate<n>:LIMit<li>:ACPower:ALTernate<ch>:ABSolute
<LowerLimit>[,
<UpperLimit>]
This command defines the absolute limit of the alternate channels.
Configuring and Performing Measurements
