Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 453 / 1071

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
453 User Manual 1178.3370.02 ─ 11
└ Decimal Separator ........................................................................................ 455
└ File Explorer ..................................................................................................455
Importing Traces ......................................................................................................... 455
└ Import All Traces/Import to Trace ..................................................................455
└ Import ASCII File to Trace ............................................................................ 455
└ File Explorer ........................................................................................455
Export all Traces and all Table Results
Selects all displayed traces and result tables (e.g. Result Summary, marker table etc.)
in the current application for export to an ASCII file.
Alternatively, you can select one specific trace only for export (see Trace to Export ).
The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.
Remote command:
FORMat:DEXPort:TRACes
on page 826
Include Instrument & Measurement Settings
Includes additional instrument and measurement settings in the header of the export
file for result data.
See Chapter 6.13.6, "Reference: ASCII File Export Format" , on page 457 for details.
Remote command:
FORMat:DEXPort:HEADer
on page 936
Trace to Export
Defines an individual trace to be exported to a file.
This setting is not available if Export all Traces and all Table Results is selected.
Decimal Separator
Defines the decimal separator for floating-point numerals for the data export/import
files. Evaluation programs require different separators in different languages.
Remote command:
FORMat:DEXPort:DSEParator
on page 912
X-Value Distribution
Defines how the x-values of the trace are determined in the frequency domain.
See "X-Value of the Sweep Point" on page 393.
"Bin-Centered" The full measurement span is divided by the number of sweep points
to obtain bin s. The x-value of the sweep point is defined as the x-
value at the center of the bin (bin/2).
"Start/Stop" (Default): The x-value of the first sweep point corresponds to the
starting point of the full measurement span. The x-value of the last
sweep point corresponds to the end point of the full measurement
span. All other sweep points are divided evenly between the first and
last points.
Remote command:
FORMat:DEXPort:XDIStrib
on page 827
Importing and Exporting Measurement Results for Evaluation