Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 450 / 1071

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
450 User Manual 1178.3370.02 ─ 11
● Stretch two fingers in the diagram to enlarge the area between them.
● Tap and drag one finger in the diagram to select the area to be enlarged. The
selected area is indicated by a dotted rectangle.
The measurement settings are adapted as required to obtain the zoomed result
display.
6.13 Importing and Exporting Measurement Results for
Evaluation
The R&S FPL1000 provides various evaluation methods for the results of the per-
formed measurements. However, you may want to evaluate the data with further, exter-
nal applications. In this case, you can export the measurement data to a standard for-
mat file (ASCII or XML). Some of the data stored in these formats can also be re-
imported to the R&S
FPL1000 for further evaluation later, for example in other applica-
tions.
The following data types can be exported (depending on the application):
●
Trace data
●
Table results, such as result summaries, marker peak lists etc.
●
I/Q data
The following data types can be imported (depending on the application):
●
I/Q data
I/Q data can only be imported and exported in applications that process I/Q data, such
as the I/Q Analyzer or optional applications.
See the corresponding user manuals for those applications for details.
● Displaying a Reference Trace - Importing Trace Data .......................................... 450
● Trace/Data Ex/Import ............................................................................................ 452
● How to Import Traces ............................................................................................456
● How to Export Trace Data and Numerical Results ................................................456
● How to Export a Peak List .....................................................................................457
● Reference: ASCII File Export Format ....................................................................457
6.13.1 Displaying a Reference Trace - Importing Trace Data
Trace data that was stored during a previous measurement can be imported to the
Spectrum application, for example as a reference trace.
The data in the import file must have a specified format (see Chapter 6.13.6, "Refer-
ence: ASCII File Export Format" , on page 457), and can be stored in
.CSV
or
.DAT
format.
Importing and Exporting Measurement Results for Evaluation