Ronde & Schwarz 1304.0004.03, Руководство пользователя

Страница: 478 / 1076

Data Management
R&S
®
FPL1000
478 User Manual 1178.3370.02 ─ 09
"File" Stores the printout to a file in the selected format. The filename is
queried at the time of storage, or a default name is used (see
Sup-
press File Name Dialog ).
Multiple windows can only be printed to a file in PDF format. If you
select an image file format, the content setting is automatically set to
Print Screenshot . Page settings are not available for image files; how-
ever, you can configure the colors used for the screenshot (see
Chapter 8.4.1.5, "Print Color Settings" , on page 480).
"Clipboard" Copies the printout to the clipboard. Since only single pages can be
copied, only screenshots can be copied to this destination, not multi-
ple windows (see
Chapter 8.4.1.1, "Print Content Settings" ,
on page 471). Page settings are not available; however, you can con-
figure the colors used for the screenshot (see
Chapter 8.4.1.5, "Print
Color Settings" , on page 480).
If you select the clipboard as the printing destination, the content set-
ting is automatically set to
Print Screenshot .
"Printer" Sends the printout to the printer selected from the Printer Name list.
Remote command:
HCOPy:DESTination<1|2>
on page 934
HCOPy:DEVice:LANGuage<1|2>
on page 935
Suppress File Name Dialog
If the Destination is a file, the file selection dialog box is not displayed. Instead, the
default storage location and filename are used.
(C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\user
\FPL_ScreenShot_<date and time>
).
Printer Name
Defines the printer to print to if a printer is selected as the Destination .
Any printers detected in the network are listed for selection.
Tip : the printout can also be stored in a print file using the selected printer driver, see
"Print to file" on page 478.
Remote command:
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
on page 941
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 940
SYSTem:COMMunicate:PRINter:SELect<1|2>
on page 941
Print to file
If a printer is selected as the Destination , use this option to store the data in a
.prn
file
using the selected printer driver.
Install Printer
This softkey opens the standard Windows dialog box to install a new printer. All print-
ers that are already installed are displayed.
Only user accounts with administrator rights can install a printer.
For further information, refer to the Microsoft Windows documentation.
Creating Screenshots of Current Measurement Results and Settings