IL-MO-044 Rev. 1 04/2010
Double Drawer Unit – QM1
Insulated
Pag. 9 / 6
PROFESSIONAL INSTALLATION REQUIRED
Internal surfaces:
Clean the internal surface of the cabinet use warm water and soap.
Wash after each use and dry to avoid formation of molds and staining.
The cabinet’s working surface are constructed from Sheet Moulding Coumpound
(SMC), a glass rinforced polyester resin resistent to corrosion.
Removing and cleaning the magnetic gasket :
•
Carefully insert a screwdriver into a corner of
the gasket (1).
•
Lift the gasket until it exits from the seat (2).
•
Remove the gasket by hand (3).
•
Clean with water and neutral detergent.
•
Insert the gasket in its seat and strongly
press it on all the perimeter. You can lubri-
cate the gasket seat to do this easly.
Drawer Guides
Drawer load capacity should not exceed 50 lbs per drawer. Never use an ex-
tended drawer for a ladder or a work platform.
1
2
3
