Ronco Ready Grill, Инструкция/Рецепты

Страница: 16 / 20

16
Care, Cleaning & Disassembling
• NOT FOR COMMERCIAL USE.
• BEFORE FIRST USE:
Be sure the Ronco Ready Grill is not plugged
in. Wash and dry the removable parts in warm soapy water. Never
immerse the machine or the cord in water. Keep at least 8 inches of
clearance on all sides and do not place it under a cabinet when in use.
A little smoke is normal when you first use the machine.
• TO DISASSEMBLE
Step 1 - Remove the front
and back Heat Shields by
sliding up and at an angle,
wiggling if necessary.
Step 2 - Remove the
left and right side Basket
Guides by twisting a quarter
turn and then lifting up and
out of the grill.
Step 3 - Remove Drip Tray
by sliding it towards you
and away from the grill.
Remove the top metal plate
for thorough cleaning.
• TO REASSEMBLE, simply reverse the above, ensuring the Basket
Guides are repositioned first, before inserting the Heat Shields.
• With the timer off, unplug your Ronco Ready Grill before cleaning.
Allow to cool before removing any parts for cleaning. Dispose of fat
from the Drip Tray by allowing to cool and solidify. Remove the front
and back reflective heat shields by pulling them up and out of the grill.
• Heat Shields and Basket Guides: Wash in hot, soapy water. Nylon
scouring pads are recommended to remove stubborn buildup. They
are dishwasher safe.
• IMPORTANT: Wash Drip Tray after every use. Built up grease can
increase the temperature and result in damage to the Drip Tray base.
• After several uses there may be a buildup of carbonized grease or fat
on the Reflective Heat Shield or Side Heat Shields. Wash off excess
fat as instructed above. If necessary, use an oven cleaner, but rinse
thoroughly after use.
Step 1
Step 2
Step 3