16
E
17
E
23
KNOW YOUR PRODUCT
Description of symbols
The rating plate on your tool may show
symbols. These represent important
information about the product or instructions
on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for
additional protection.
Tool is listed by Underwriters
Laboratories, and listed to Canadian
Standards by Underwriters
Laboratories.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All
tools, hoses and packaging should
be sorted, taken to the local recycling
centre and disposed of in an
environmentally safe way.
Specifications
Voltage:
120V ~ 60Hz
Power input:
6 AMP
No-load speed:
800 – 3,000RPM
Stroke length:
7/8" (23mm)
Cutting angle range:
±45°
Cutting capacity in:
Wood 4" (100mm)
Steel 1/4" (6mm)
Blade types:
“T” and “U” shank
Net weight:
7.28 Ibs (3.3kg)
Laser Class II
Wave length:
650nm
Output power:
≤
1mW
Safety rules for laser lights
The laser guide used in the tool is Class
II with a maximum output of 1mW and a
wavelength of 650nm. The laser guide does
not normally present an optical hazard,
although staring at the beam may cause flash
blindness.
User information
CAUTION.
The use of optical instruments
with this laser product will increase the
chance of eye damage.
• Do not stare into the laser beam.
• The laser shall be used and maintained
in accordance with the manufacturer’s
instructions.
• Never aim the beam at any person or an
object other than the work piece.
• Always ensure the laser beam is aimed at
a sturdy work piece without a reflective
surface (i.e. wood or rough coated surfaces
are acceptable). Bright shiny reflective sheet
or the like is not suitable for laser use as
the reflective surface could direct the beam
back at the operator.
DESCRIPTION, SPECIFICATIONS
AND INSTRUCTIONS
1. Trigger switch
2. On / off switch
3. Lock-on button
4. Scrolling control knob
5. Pendulum lever (scrolling lock)
6. Blade guard
7. Blade guide
8. Variable speed dial
9. Removable handle
10. Handle release catch
11. Handle locating pin (not visible)
12. Combined laser light/LED switch
13. Laser aperture
14. Dust extraction port
15. Dust extraction adaptor
16. Cutting angle scale
17. Tool-free blade change control
18. Shoe plate
19. Bevel locating pin (not visible)
20. Parallel guide
21. Parallel guide locking knob
22. Jigsaw blades
23. Anti splintering insert
24. Blade storage area (x 2)
25. Blade storage release tab (x 2)
26. Hex key
Know your product
2
1 3
4
5
6
7
8
9
10
12
13
14
16
17
18
21
25
15
24
26
20
15
22
������������������������������������������������
�������������������������������������������������������
�����������������������������������������
�����������������������������������������
������������������������������������
�����������������������������������
�������������������������������������������������
����������������������������������������
��������������������������������������������������������������������
������������������������������������������������������������������������
�����������������������������������������������������������������
�������
�������������
226103
