Romy HyLab, Руководство пользователя

Страница: 3 / 40

Electrical risk:
Make sure that the supply voltage indicated on the rating plate of the appliance
matches your electrical installation.
The formulator must be powered only at a very low safety voltage corresponding to
the marking of the device.
Not connecting the device correctly could be dangerous.
Plug the connector to the unit before connecting the power supply to the mains.
Plug your HyLab formulator into a power outlet.
To unplug, grasp the power supply and not the cable.
Do not immerse the mains cable and / or power supply in water or other liquids.
Check the condition of the power cable regularly. If it appears damaged, stop using
the device immediately. Contact the dealer or their after-sales team to replace the
cable.
Do not expose the device to water or excessive moisture.
Do not use the device with wet hands.
Prevent any water from splashing onto the device.
Do not allow the water reservoir to overflow.
Should water get into any part of the device other than the water reservoir, or in the
event of an emergency, unplug the power cable immediately and contact the dealer.
Do not attempt to switch the device back on: there is a risk of electrocution.
Unplug the device if you are not going to be using it for a while.
Under no circumstances should the device be used near a shower, bath or other
source of water.
Warnings: