Rotary switch with 3 levels and 4 positions, the first level is ventilator only, the second level is 2KW heating
power
，
and the third level is highest power 3KW
。
0
～
40
C adjustable thermostat to control the room temperature
，
the thermostat button can
be turned from 0 to 270 degree.
THERMOSTAT INSTRUCTIONS
At first turn the thermostat to “Max” and let the heater operate with full power input. When the
room temperature reaches the required value, turn the thermostat to left until it switches off.
The thermostat will then switch on and off automatic to control the room temperature
according to the preset value and keep the room temperature constant.
When using the heater for the first time, you may notice a slight emission of smoke. This is
quite normal and it stops after a short time. The heating element is made of steel and was
coated with a layer of protection oil by production. The smoke is caused by the left oil when
heated.
After the use turn the thermostat to OFF position and turn the selector switch to Fan level, let
the appliance cool down for two minutes. For appliances with time delay stopping function,
even the power switch is off, the delay circuit may turn on the appliance if the inner
temperature reached the preset function value. The delay time depends on the ambient
temperature. For 20
C ambient it is ca. 3-4 minutes. If the ambient temperature keeps being
more than 27
C so the delay device cannot cool down, the delay time may be very long or
the delay circuit doesn’t open
，
hereby the user can only disconnect the appliance from the
power supply by pulling out the plug.
3.
Angle adjustment description:
