1
16
2
4
5
8
3
6
7
10
22
14
19
15
18
12 11
13
17
9
20
21
22
cutting dir
ection
Description of tool
1. Power supply cord
2. Operating switch
3. Locking button of operating
switch
4. Cutting speed switch
5. Handle
6 Hand rest
7. Scale for depth adjustment
8. Control knob for depth adjustment
9. Adjustable guide roller
10. Rear roller
11. Tracking wheel
12. Spacers
13. Roller axle
14. Cutting blade cover
15. Threaded connection
16. Ejector pipe
17. Dustbag
18. Air inlet openings
19. Motor housing
20. Adjustment screw for
guide roller
21. Locking screw
22. Positioning arrows
• Adjust the
tracking wheel (11)
with
spacers (12)
to the pitch as required when using nap-rolls, or tiles.
• Fit the
ejector pipe (16)
and
dustbag (17)
.
• Adjust the groove depth.
– With your left hand push down the
handle (5)
of the drive unit up to the magnet stop.
– With your right hand on the
control knob (8)
adjust the required groove depth until approx. 3/4 of the
material thickness is visible on the scale.
•
• Align the tool along the grooving line via the
adjustable guide roller (9)
and the red
positioning arrows (22)
.
Pay attention to the direction of cutting !
Caution: Cutting blade can protude!
Operating condition
12
