Romus 194385, Руководство пользователя, Страница: 37 / 44

www.romusworld.com www.romusworld.com
35
ON
OFF
MÉMOIR E
MEMORY
MARCHE
DÉ
GIVRAG
E
MÉMOIRE
HUMIDITÉ
HUMIDITY
%
OPER
AT
ION
DEFROSTING
MEMO
RY
HUMIDITÉ
HUMIDITY
OPERATION
Control panel buttons :
1. ON/OFF : Press ON/OFF, the unit runs in a circulation “ON-OFF-ON”.
2. Humidity up and down: Press “humidity up and down” for once, the set humidity
increase or decrease for 1%. Press the key for 1.5 seconds and the setting value increase or
decrease by 1% continuously with the speed 5 points per second.
3. Memory: Press the memory button and the memory indicator light on to start the
function of memory when power cuts off. Press the memory key again; the memory
indicator dies to shut off the function of memory when power cut off.
Starting up the appliance:
1. Plug the appliance in, it will emit a “beep”.
2. Press “ON / OFF”, the power indicator lights up, and the humidity display window shows
the humidity set before the appliance was last switched off. The initial humidity setting is
60%, after 3 seconds, the unit will show the current humidity.
3. 3. Press the humidity setting buttons to adjust the desired humidity. If the set humidity
is 3% lower than the room humidity, the unit will operate, if the set humidity is 3% higher
than the room humidity, the unit will stop operating.
4. When the humidity is less than 30%, the unit runs continuously, the humidity display
indicator shows “CO”.
Turning off the unit:
1. Press “ON / OFF” when the unit is on, the unit will stop and all the indicators will turn off.
EN
194385