There may be a round socket close to the A and B connectors shown above. Do not
connect the power supply into this socket.
Secure the column to the base using the bolts provided in the base.
Connect the power supply to the circular POWER IN 12V AC socket on the tube base.
This circular socket is to the extreme right of the control panel.
Plug the ROMPA® Waterless Rainbow Tube into the mains and switch mains power
on. One electrical socket is required.
Turn the LED Waterless Rainbow Tube on using the on/off switch at the rear of the
base. A gentle humming sound will be heard and subtle vibrations felt (notably
towards the lower part of the tube) from the pump in the base. These are
intentional features to add multi-sensory value to the product.
Do not put any liquids, including water inside the tube.
Install 3.7V Li-SOC12 batteries (to be purchased separately) inside the remote
control. Slide the battery compartment door off the back of the remote control (not
secured by a screw). Install 2 new 3.7V Li-SOC12 batteries following the polarity
indicated.
Modes:
The ROMPA® Waterless Rainbow Tube has 23 modes which can be selected using the up
and down arrows on the remote control unit. The digital display at the bottom of the tube
and on the remote control unit will indicate the mode chosen. The remote control will still
work when the Waterless Rainbow Tube is in a cushioned platform.
MODES 1 to 5 are solid, non-moving light effects.
MODES 6 to 17 are changing light effects.
MODE 1 - Solid, static red colour in the whole tube
MODE 2 - Solid, static green colour in the whole tube
MODE 3 - Solid, static blue colour in the whole tube
MODE 4 - Solid, static yellow colour in the whole tube
MODE 5 - Solid, static purple colour in the whole tube
MODE 6 – No coloured lights when the mode is first selected, then blue light begins at
the bottom of the tube and gradually fills up the tube until the whole tube is blue.
Once the blue light has reached the top of the tube, red light gradually begins at the
top of the tube and gradually fills down the tube. Once the red light has reached the
bottom, green light fills the tube up, then a purple light fills down the tube and so on.
MODE 7 – multi-coloured bars of light move up the tube with non-illuminated areas
in between these bars
MODE 8 - red bars of light move up the tube with non-illuminated areas in between
these bars
MODE 9 - purple bars of light move up the tube with non-illuminated areas in
between these bars
MODE 10 - blue bars of light move up the tube with non-illuminated areas in
between these bars
MODE 11 - green bars of light move up the tube with non-illuminated areas in
between these bars