11.
Safety
Always supervise the use of this product
.
Use indoors in a dry environment.
For 3 years and over.
12.
Technical Specification
Size:
34 x 34 x 6cmD (16cmD with the legs extended)
Display
29.5cm diameter
Red button
3.4cm diameter
13.
Installation
Accessing the battery compartment back panel door
Remove screw from back panel door
Insert two AA batteries into the battery compartment.
Replace the back panel door and screw.
Note:
Do not mix old and new batteries, rechargeable and non-rechargeable batteries, or alkaline
and non-alkaline batteries. Non-rechargeable batteries are not to be recharged. Exhausted
batteries are to be removed from the product. Rechargeable batteries are only to be charged
under adult supervision.
Activating the Spinner
Press the large red button to activate the spinner.
Activate an external switch connected to the spinner via the jack socket on the side of the device.
Using an external switch
Different switches can be connected to operate the Spinner by using a 2.5mm plug into the
switch jack located on the side of the device. Activate the external switch to spin the arrow.
Note:
The arrow pins for a brief time period of less than ten seconds. Activating a switch
repeatedly or holding a switch down will not impact on the outcome of the player’s spin.
Additionally, one the arrow stops, there is a slight delay time during which additional switch
activations will not cause the arrow to spin. This ensures that players have the time to read the
outcome of the spin.
Using the Stand
Pull out the legs from the back of the Spinner to place in an upright position.
