7.
Best Use
Use under supervision
8.
Compatible ROMPA® Products
See
for a wide range of vibratory products
9.
Starting Up
Install batteries, then squeeze to activate
10.
Detailed Description
Squeeze him to make this ample amphibian tingle with excitement! Jumbo furry frog emits
hearty vibrations to provide tactile, vibratory and somatosensory stimulation. Requires 2 D
batteries (to be purchased separately). Fur exterior
11.
Safety
Always supervise the use of this product
12.
Technical Specification
Size:
30 x 30 x 30cm
Weight:
1.8kg (4lbs)
13.
Installation
1.
Undo the zip down the back of the body of the frog.
2.
Take out the battery compartment and the vibration unit attached to it. Take care not
to damage the wiring connecting these two pieces.
3.
Open the battery compartment by first removing the small positive (X) screw and then
sliding off the cover.
4.
Install 2 D batteries, observing the polarity indicated.
5.
Replace the cover and then the small screw.
6.
Slide the small ON/OFF button (near the screw) to ON.
7.
Place the battery compartment and vibration unit back into the frog and close the
zip. Place the unit well forward if you want to feel the vibrations through the frog’s
chest, or only a little way inside the back if you want the vibrations to be more
intense at the back of the frog.
8.
Squeeze to activate. This product is not sound-responsive.
9.
This product does not incorporate a sensitivity control.
10.
After use, undo the zip, and slide the small ON/OFF switch to OFF.