Insert two AA batteries, observing the polarity indicated.
Close the battery compartment and tighten the screw to secure in place.
2.
Connect Mog to a switch (not included) via the jack socket at the end of the cable
attached.
3.
Activate Mog by activating the switch you have just connected.
14.
Care and Maintenance
Do not allow clients to pull on the cable.
Do not immerse the unit in water.
Change the batteries when operation becomes erratic.
Remove the batteries when Mog is not in use for prolonged periods.
Do not use rechargeable batteries, and do not mix old and new batteries.
15.
Troubleshooting
Problem: Mog will not move or make a sound
Make sure your switch is properly connected (pushed as far as possible into the jack
socket).
Check the batteries and replace these as required.
Make sure your switch is not faulty – check it with another switch-adapted product
.
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
MOG 20684, January 2017
Copyright ROMPA® Ltd