Use of buttons
Power button (for misting control)
Press this button and hold for one second, the humidifier will turn on. You will see
the LED lights turn on and mist coming out of the top. This is now in “high” misting
mode. Press once to switch to “low” intensity. Rotate the nozzle to adjust eh mist
direction (Fig 7)
To turn off the humidifier, press the power button and hold for one second.
LED Control Button (for lighting control)
Press this button to switch between the lighting modes 1. Flashing, 2. Glowing
continuously, 3. Switch off. You may press the lighting button to switch on the
light only. That means that lighting and misting can be operated separately.
Operating Time
At full capacity, approximately 200ml, the humidifier will generate mist for 2-4
hours continuously. The timer will switch off the humidifier automatically after 2
hours use in “high” mist level or 4 hours in “low” mist level. Should water run out
earlier than the timer, probably owing to low relative humidity or temperature,
the humidifier will switch off by itself as a safety feature.
14.
Care and Maintenance
CAUTION: Always switch off the appliance and disconnect the power cord from the
electrical outlet before cleaning.
Empty the water cavity. Wipe with a soft, damp cloth.
Each week, with a cotton wipe, wipe the metal part of the ultrasonic transducer and
water shortage protection sensor at the bottom of the water tank with sanitary
alcohol (Fig 8)
