Do not remove the ascension cable pin from the assembly during use or adjustment.
In the unlikely event that you do ever need to remove the ascension cable pin, make
sure the locking knobs are completely visible and seated once the ascension cable
pin is back in place.
12.
Technical Specification
Size:
Crossbeam 120cmL; upright 90cmL x 25cm diameter
Working load: 180kg (400lbs)
13.
Installation
Please ensure that you ascertain from the appropriate authorities that the fixing
point is suitable and will hold up to 200kg load at up to a 45° angle in any direction.
Please check equipment immediately for any damage that may have resulted during
shipping. If any damage has occurred, please contact ROMPA® immediately.
1.
To open the Safety Snap, turn the locking nut
clockwise as far as possible.
2.
To close and lock the Safety Snap, turn the locking
nut anti-clockwise as far as possible.
Each Safety Snap is intended for use with one piece
of equipment and / or one accessory.
