Rompa 20601, Руководство пользователя

Страница: 2 / 9

7. Best Use
Use indoors with bubble tubes and water mattresses.
8. Compatible ROMPA® Products
ROMPA® offers a range of bubble tubes and water mattresses – see www.rompa.com for
more information.
9. Starting Up

To empty water, submerge the orange pump unit into the water. Place the other
end of the tubing into a suitable receptacle. Connect the power lead to the power
supply. Plug in and switch on the power supply in at the wall.

To fill with water, submerge the orange pump unit into water e.g. in a sink. Place the
other end of the tubing into the product to be filled with water. Connect the power
lead to the power supply. Plug in and switch on the power supply at the wall.
10. Detailed Description
Offers quick, safe and easy means of emptying and filling your bubble tube and Water
Mattress. Includes 4m of tubing.
11. Safety

Always supervise the use of this product.

Only the orange unit should be submerged – never allow water to come into contact
with any other part i.e. power supply, power lead.

Make sure your hands are thoroughly dry when plugging in or unplugging the
product.
12. Technical Specification
Power supply: Double isolated
AC Adapter
Input: 100-240V ~ 1.0A 47-63Hz
Output: 12V
---
24W 2A
CE, UL, CS, GS approved
13. Installation
This pump is intended for water only, and for indoor use only. It will take approximately 10
minutes to fill/empty a 2m bubble tube.