switched OFF, the last mode selected is NOT retained – the product will
automatically start next time with the Piano.
4.
Press the coloured circle on a Bumpa to hear the sound. Operation is momentary.
This means that one press will activate a sound for 2 or 3 seconds. The product does
not require one press of the coloured button to start the sound, and another press to
stop it as the sound will stop by itself. The duration of the sound cannot be controlled.
5.
The furthest left Bumpa has the lowest pitch. Moving across the Bumpas left to right
and pressing each subsequent circle of the Bumpa obtains a higher pitch.
6.
Adjust the volume as required using the dial at the bottom.
7.
Remember to switch OFF after use and unplug.
14.
Care and Maintenance
1.
Handle the Control Box with appropriate care – it is recommended that a responsible
adult regulates the Control Box – the Bumpas are intended to be controlled by
clients rather than them regulating the Control Box.
Fabric Care
Vinyl will crack, tear and rub off if subjected to sharp objects or continual rubbing by
hard objects. Remove shoes, and avoid buckles, zips or sharp/hard/pointed objects
coming into contact with the surface.
Check seams regularly to ensure that these are not worn or split and the interior filling
cannot be accessed. Do not attempt to access the interior part of these products. Never
allow children or vulnerable people to access the interior part of this product.
Wipe off accidental marks/liquids at the time they occur or are noticed.
From time to time, if possible, lift or move products to clean all surfaces and the
floor underneath.
Our products are intended to provide comfort, relaxation and activity. Avoid eating
and drinking whilst using these products.
Steam cleaning is not advised.
Do not place near sources of heat or fire that may damage the surface (radiators,
fires, underfloor heating, hot central heating pipes etc.)
Direct contact with bright sunlight may affect material over time.
Do not saturate the material with lots of water.
PVC (Vinyl)
Use a soft brush remove all loose dust/dirt.
Clean with a mild detergent (such as Lux soap flakes in luke-warm solution) applied
to a sponge or damp cloth. Do not use an abrasive cleaning pad.
This may be sanitised using a weak solution of Milton fluid.
Do not use excessive amounts of water and always ensure the PVC is dry after cleaning.
Do not use boiling/very hot water, washing up liquid / aggressive detergent or
solvent based cleaner as this will cause the coating to discolour and go hard.
Steam cleaning is not advised.
Once this product is eventually exhausted, please dispose of it appropriately….