Rompa 19767, Руководство пользователя

Страница: 7 / 35

11. Safety

Always supervise the use of this product

Please check equipment immediately for any damage that may have resulted during
shipping and contact ROMPA® immediately if there are any problems.

The layout of the activity area, proper installation and maintenance of your
equipment is critical; make sure the product is used in a safe and appropriate place
and way.

Do not attempt to move the Ball-Bubble Tube while filled with water.

Please ensure that no water comes into contact with the circuit boards in the base of
the Ball-Bubble Tube.

Take extreme care when filling/emptying the Ball-Bubble Tube to ensure the
electronics remain dry.

Always disconnect the power cables when filling/emptying the Ball-Bubble Tube

The Maxi Ball-Bubble Tube is suitable for use on a level horizontal floor. Do not
attempt to move the Maxi Ball-Bubble Tube when it is full of water.

Do not insert anything into the bubble tube base other than the power supply
provided and a 17274 Interactive Switch Box.
12.
Technical Specification
Base height: 11cm
Tube Diameter: 20cm
Base Diameter: 51cm
Total Product Height:
19767:
107cm
19768: 157cm
19769: 182cm
19770: 207cm
Note: please take total height into consideration if requiring a Canopy when your ceiling is
low
Pump: Schego type WS3
Power Supply: 230 Volt (U - 110V)
Input 110V Output 12V AC 60W
Input 230V Output 12V AC 60W
(The power supply is UL listed – E1494743G58, and meets the requirements of BS EN61558-
1 and BS EN61558-2-6)
Power cable: 5.15m approximately