Romoss eUSB sofun 4, Руководство пользователя

Страница: 5 / 5

eUSB sofun 4
Swivel
Model
5.5mm 2.5mm
5525R
Acer,Asus,Clevo,HP,IBM ,
Lenovo,Compaq,Gateway,
Fujistu,Toshiba,Advent,MSI,
Hitachi,NEC,Panasonic,
Samsung,Sharp
6.5mm 4.4mm
6544R
Sony ， Fujistu ， Samsung
4529D Dell
4.5mm 2.9mm
3011A Asus
3mm 1.1mm
7450D Dell
7.4mm 5mm
3011S
Samsung
1.1mm 3mm
Outer
Diameter
Inner
Diameter
15-16V 18-20V
2. Choose a proper eUSB charging cable
There are two types of eUSB charging cables, one with
DC15~16V output voltage, the other with DC18~20V output
voltage. The bundled charging cable is with DC18~20V output
voltage (DC 15~16V output voltage charging cable not included
in this product). Check carefully before using eUSB charging
cable if the output voltage matches the laptop requirements.
3. Choose a swivel joint that fits the laptop port
Select eUSB swivel joint according to laptop port specifications
(e.g. model, specifications, suitability). See the table below for
details:
Do not use DC15~16V charging cable with DC18~20V laptop
Do not use DC18~20V charging cable with DC15~16V laptop
eUSB swivel joints for different laptop models
Joint
Suitable For
Please select proper charging cable and swivel joints otherwise
mismatch between laptop/ultrabook charging voltage and eUSB
charging cable output voltage, laptop/ultrabook port specifications
and swivel joints specifications will lead to improper functions.
Apple product users can choose dedicated ROMOSS Macbook
charging cables, which supports plug-and-use and needs no
swivel joints. Please contact local distributor for details.
4. Charge laptop with eUSB sofun 4
Connect one end of eUSB charging cable to corresponding
swivel joints and the other end to the laptop.
①
② Connect the other end of eUSB charging cable to eUSB port
on eUSB sofun 4. Switch it on and the charging process starts.
III. Charging digital products using eUSB sofun 4 (Figure )
1. Check if the charging voltage of the digital product is
compatible with the DC5V output voltage of eUSB sofun 4.
2. Use the digital product's original cable, and connect one end
to the digital product, the other end to eUSB sofun 4.
Connected and switch it on, the charging process starts with
the working signal lights up.
When using the product, the signal will flicker if the power is
less than 5% to prompt users that the battery itself needs to
be charged.
Flashlight function
Press the switch for 2 seconds to turn on the LED flashlight and
another 2 seconds to turn it off.