FOR DROPSIDE TYPE OF 401 (older version)
STEP 1d
Completely tighten all the 4 bolts (6) which fixes the mattress support (M) to the
stabilizing bars (S) and all the 4 bolts & nuts (5+7) which fixes the metallic brackets of
the mattress support to the metallic frame.
STEP 2d
Completely tighten all the 8 Allen bolts loosened at STEP 1d and all the 4 Allen bolts
used at STEP 2d.
PLEASE REFER TO “ASSEMBLY INSTRUCTIONS FOR YOUR 401 DROP-SIDE CRIB”
(Two adults are required to complete this step)
2
3
S
F
STEP 8
D
STEP 6b
(6)
(M)
(S)
(M)
STEP 4
TR
2
1
STEP 2d
Loosen all the 8 Allen bolts ( & ) which fixes the stabilizing bars ( ) and the fixed side ( ) (see
for
details).
Remove the drop-side ( ) (see
for details).
arefully s
Using a Phillips screwdriver (not supplied) you must completely remove all the factory mounted hardware
involved in drop-side moving, found on the end panels of your crib. You must remove:
- 2 metallic pins (from both end panels);
- 2 white plastic pins (from both end panels).
Loosen all the 4 bolts
which fixes the mattress support
to the stabilizing bars
.
Adjust the mattress support
to its lowest position (see
for details).
Attach the toddler rail (
) using 4 Allen bolts ( ) and the Allen key ( ) supplied. Start the threads by hand to
assure you don't strip the threads, then, use the Allen key.
After completing
, your crib should look like the one depicted on the first page of this instruction booklet.
C
tore the drop-side in a proper place, away from
direct sunlight and moisture, taking care not to scratch the wood finish.
Remember: the resulted hardware is not a toy!
You must keep this hardware in a proper place, away from your children.
2
x 4
HARDWARE BOX CONTENT
1
2
Please locate and confirm that
you have the following parts:
TR
. toddler rail = 1
one bag of hardware with the following:
. Allen wrench =
. Allen bolt (50mm - 2") = 4
1
2
1
TR
Required tools:
CAUTION:
Allen wrench (supplied), Phillips
screwdriver (not included), flat screwdriver
Do not use a power screwdriver which
can cause screws to break or strip
(not
included).
Phillips screwdriver (not included)
