13
30
n
Receiving a Call
When
a
new
call
is
received,
t
If the caller can be identified, the caller's
phone number is displayed.
1. To answer the call, press the
key. If
you
have
activated
the
Auto
Answer
function, when the handset is on the
base, simply lift it up to answer.
he
call
information will appear.
2. You can speak. To end the call, either
press the
key or replace the handset
on the base.
Result:
After you hang up the call, the LCD
displays the call duration.
Notes
:
You can select the ringer volume by using
the
key when the phone rings with an
incoming call.
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
caller's hang-up or after the parallel phone
had answered the calling.
Modify PIN
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
3. The display shows "
" to prompt you to
enter the old PIN. If the old PIN code is
validated, you will be prompted to enter a new
PIN code. If the old PIN is not validated, a
warning beep will sound and you will be
returned to the
menu.
1. Perform steps 1 and 2 of paragraph "
".
2. Use the
key to choose
menu,
press the
key.
4. Enter the new PIN, press the
key. You will
be requested to confirm the PIN code. Enter
the new PIN again then press the
key to
confirm and exit.
MODIFY PIN
MODIFY
PIN?
PIN
Terminate
HS
BS Reset
This function allows you to reset the Base
setting to the factory default.
1. Perform steps 1 and 2 of paragraph "
".
2. Press the
key to choose
, press
the
key. You will be prompted to enter the
PIN code.
3. Enter the PIN code (the default PIN is 0000),
then press the
key. If the PIN code is
validated all Base settings will be returned
to
the
factory
default,
otherwise
the
settings will remain.
After resetting, the base will be reset
and the handset will return to Standby
mode.
BS DEFAULT
Result:
Terminate
HS
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
