
Owners Manual
Distributed by
Companion Brands
Bundoora VIC 3083
www.companionbrands.
com.au
RO
M
13
8
TROUBLE SHOOTING GUIDE
PROBLEM
SOLUTION
PROBLEM
SOLUTION
1. CONDENSATION
This is caused by lower temperatures on
the outside of the tent combined with body
heat on the inside of the tent. When this
occurs, avoid touching walls. Leaving doors
and windows open will reduce condensation
of moisture.
4. FAULTY ZIPPER
The zipper separates, you can move the
slider to the beginning of the zipper tape
and rework the zipper. If this continues,
local awning or upholstery repair shops
may be able to assist you.
2. SEAM LEAKAGE
To protect against seam leakage, apply a
generous amount of seam sealer on all
interior seams.
5. FLOOR
CONDENSATION
A ground cloth under the tent prevents the
floor from feeling damp and helps prolong
the life of the tent. The cloth should be
smaller than the tent floor to prevent rain
from running under the tent.
3. MILDEW
To avoid mildew, never store your tent wet or
damp. However, if mildew occurs, clean using
a mild detergent. Let the tent dry completely
in sunlight and apply seam sealer compound
on inside seams
6. REMOVING PEGS
Peg should be pulled with another peg,
hammer or peg puller, but never by pulling
the tent. Avoid pegging tent so tight that it
stretches the fabric. Over stretching may
cause peg loops to tear.
This troubleshooting guide is designed to give you years of fun and enjoyment from your tent.