13
User Manual and Product Specifications
Step 2
Refer to the specification label on your battery or consult the
battery manufacture to establish the type of battery being
charged. Set the ‘DIP’ switch on the rear of the controller to
the matching battery type being charged.
Step 3
FIRST, connect the DC clamp on the 0.8m extension lead to the
correct polarity terminals on the battery being charged. Example;
A
‘RED’ DC clamp to the Positive ‘+’ terminal and the
B
‘BLACK’
DC clamp to the negative ‘ –‘ terminal.
C
Connect other end of the 0.8m extension lead (30A plug) to the
controller output (30A plug)
D
Connect the controller input lead (30A plug) to either end of the
3m extension lead (30A plug) then finally, join the remaining end
of the 3m extension lead to the solar mat output lead
E
Ensure the all connections are firm and that the extension lead
is positioned not to cause a tripping danger to people walking by.
And that’s it, your battery will now be charging.
