Roma Medical Shoprider, Руководство по обслуживанию

Страница: 21 / 27

Continued…
Dynamic DL Controller
VSI ‘Lock’ Function*
Your VSI controller is equipped with a lock function to prevent any
unauthorised use. To lock the controller:
•
When the power is on, press and hold the power button for
about 1 second until the system bleeps.
•
Move the joystick forward until it bleeps, then move it to the
back position until you hear a bleep.
•
Release the joystick – you should now hear a long bleep, this
indicates the system is now locked.
To unlock the controller:
•
Press the power button until the speed indicator lights go from
left to right.
•
Move the joystick forward until it bleeps, then move it to the
back position until you hear a bleep.
Release the joystick – you should hear another bleep, this indicates
that the system is unlocked and ready for use.
*VSI controllers can be re-programmed using a PP1 unit which can
enable/disable this function.
Flash
Code
Fault Type Suggested Actions
1 Low Battery Voltage
Fault
Check battery voltage is above 17v.
Check battery connections and terminals.
Check condition of batteries.
2 High Voltage Fault Check battery voltage is below 32v.
Check battery wiring and terminating is
secure.
3 Left Motor Fault Check left motor, connections and cables.
4 Right Motor Fault Check right motor, connections and cables.
5 Park Brake Fault Check the brakes, connection and cables
6 Controller Fault Contact Service Agent.
Note: In some cases a motor fault that occurs
when driving may cause a 6 flash fault to be
registered.
7 Motor Stalled or
Joystick Out of neutral
at power up.
Ensure joystick is released at power up.
Ensure motors are free to turn and power off
and on.
21