19
Check list
If your powerchair fails to operate, please check the following:
•
The unit is switched on.
•
All plugs and connections are firmly fixed.
•
Battery level shows full charge.
•
Free wheeling device is in the drive position.
•
Circuit breaker has not tripped.
•
Battery and controller lead are properly connected.
If the free wheel device has been operated with the powerchair switched on, the powerchair will not
operate until the unit has been turned off and on again.
Joystick Error codes
Your controller has the ability to diagnose possible errors in the electrical system, which may prevent
your powerchair from operating. These are displayed by a flashing ‘spanner’ symbol on the joystick.
The fault is shown against the number of flashes on the display.
Flash Code
Possible Fault
10
Unkown Fault.
9
Communication fault - check connections.
8
Controller fault – check connection / cable.
7
Joystick fault – check connection / cable.
6
Left side brake fault - check freewheel lever position.
5
Right side brake fault - check freewheel lever position.
4
Left hand motor fault – check connection / motor brushes.
3
Right hand motor fault – check connection / motor brushes.
2
Battery fault - check fully charged.
1
User error - switch unit off and on.
Note:
If your powerchair fails to operate after checking the above possible faults
consult your local Dealer immediately. Also ensure that the joystick has not been
accidentally locked – refer to page 10.
Содержание Reno Elite P325
Страница 23: ...23 Notes ...
