Tiller Controls
Finger Lever Controls
The finger lever controls the reverse and forward motion of the scooter. Pulling
the right lever will drive the scooter forward, pulling the left lever will reverse the
scooter. The amount of pressure applied to the levers will determine the speed
the scooter travels up to the maximum speed selected. More pressure = more
speed. Release the finger lever and the scooter will automatically come to a safe
stop as the electromagnetic brake is applied.
Horn Button
The red button operates the scooters horn.
Battery Level Indicator Gauge
This gauge gives you a guide to the amount of charge left in the scooters
batteries. This will give the truest reading when the scooter is in motion.
On/Off Key
Insert the key plug supplied with the scooter. The battery gauge needle will
move. There may be a slight delay before the thumb levers operate as the
controller checks the scooters circuits.
This should only be used to
warn others of your presence and not as a rebuke of any form.
Always
fully charge the batteries before driving your scooter and never let
the batteries become completely drained, as this may cause
permanent damage to the batteries.
Never leave the key in the switch
unattended to prevent unauthorised use. Do not switch the power off
to stop the scooter unless it is an emergency. The scooter will stop
very abruptly if stopped in this way.
8
