Brake Operation
The brake can either be used as an aid to control the chair whilst travelling
down an incline or can be locked on for when the chair is stationary.
Always lock the brakes on when leaving the chair/user unattended to
avoid any incident as the chair will roll away if left on an incline with the
brakes unlocked.
To use the brake to control the chair on an incline pull the lever up into the
handle. To lock the brake, push down. The brake handle will ‘lock’ into the
lower position. To unlock the brake, simply pull upwards and the brake will
become free.
Safety Checks
Periodically under take the following inspections. The frequency of these
inspections will be determined by the amount of use the wheelchair is
subjected to.
It is suggested that your wheelchair has an annual inspection and service by
your dealer.
General
Wheelchair opens and closes smoothly
Wheelchair runs straight (no excessive drag or pull to one side)
Brakes
Brakes do not rub on the wheels when moving.
Brakes are easy to apply.
No loose linkages on the brake
Brake cables are not damaged
Cross braces
Inspect for wear or bends.
Pivot bolt is secure, but slides freely.
9
Содержание 1232
Страница 11: ...11 ...