3. For a home or workplace measurement all typical loads should
be switched on, even those that turn on only temporarily, for
example, refrigerators, electrical storage heating (also in
adjoining rooms). By turning individual loads on and off, the main
causes can be isolated.
4. A sketch of the location to be measured and logged measured
values allow for a subsequent analysis of the situation. In this
manner, appropriate corrective measures are derived.
5. The measurement starts in the measurement area "200 V/m"
and switches only where the display overflows due to high field
strength (only one 1 is to be seen in the display ist) in the
general area "2000 V/m".
6. All measurements should be repeated at different times of day
and days of the week to determine fluctuations.
7. The switchable, field strength proportional tone simplifies a
sound measurement.
©ROM-Elektronik GmbH
Page 10
