Roltec BOA2 Скачать руководство пользователя страница 60

Страница: 60 / 64

MANUAL

Spare parts and accessories

Spare parts and accessories should be ordered from the ROLTEC dealer. The wheelchair’s

expected life span is approx. 8 years, depending on use. The product’s life span depends on

the frequency of use, the application environment as well as the care of the product.

Components that are included in the supply

A solid base, charger, leg supports, control box, back rest, seat cushion, arm rest and head

restraint.

RESERVATIONS FOR CHANGES TO THE SPECIFICATIONS as a large selection of optional

extras and accessories are available. There may therefore be different components to the

chair.

The chair is supplied ready-assembled and ready to use, but the USER MANUAL MUST

ALWAYS BE READ BEFORE THE WHEELCHAIR IS USED.

This user manual has been drawn up in compliance with current regulations.

As ROLTEC el-kørestole A/S undertakes ongoing product development, we reserve the right to

make

changes.

Содержание BOA2

































































Результаты поиска

Содержание BOA2

Отзывы:

Похожие инструкции для BOA2

Бренды по названию

Популярные бренды

Roltec BOA2, Руководство пользователя

Результаты поиска

Содержание BOA2

Отзывы:

Похожие инструкции для BOA2

Бренды по названию

Популярные бренды