6
Assembling goes as follows:
• Make sure to not lose the small pre-mounted spacer rings Z
placed in-between the clamps of the umbrella part.
They should always remain on the long screws.
• Shorten the screw-thread protections (figure 2 and 3) with a
scissor. Wrap them around the two screws to protect the
frame of your rollator.
• Fix the mounting clamp as high as possible on the frame,
with help of the Allen key (figure 4). The plastic wing nut
must point outwards.
• Tighten the screws firmly.
• You can now place the umbrella pole in the umbrella clamp
from above and tighten the plastic wing nut (figure 4).
• The adjusting ring Y (figure 5) can be placed on the umbrella
pole for setting the umbrella to the desired height. You can
choose from a maximum of three different heights.
• Tighten the screws again after two days.
Figure 5: Attaching the
adjusting ring Y.