background image

DESCRIPTION

FRONT PANEL

MIC ONE

MIC TWO

tone

tone

SOURCE

ONE

SOURCE

TWO

SOURCE

THREE

TREBLE

BASS

0            10

RIGHT OUTPUT

0            10

LEFT OUTPUT

pwr

clip

clip

MA2355

       Mixer /
  Amplifier

-             +

-             +

0           10

0           10

0           10

0           10

0           10

Mic 1, 2: Adjust the level of signal from the corresponding Mic Input.
TONE 1, 2: Adjusts the frequency content of the microphone signal in the channel.
When the control is turned counter-clockwise, the high frequencies are cut, when
the control is turned clockwise, the low frequencies are cut.
Source 1 - 3: Adjust the volume of input from the RCA Source Inputs.
Bass: Adjusts the low frequencies of the Source 2 and 3 signals only.
Treble: Adjusts the high frequencies of the Source 2 and 3 signals only.
Left /  Right Output: Adjusts that channel’s output level
Clip. LED indicating clipping in the MA2355 amplifier.
Power: LED indicating power is applied to the MA2355 and the unit is on.

REAR PANEL

3

2

1

RECORD
OUTPUT

MIC TWO

MIC ONE

SOURCE 1

STEREO

MIC 2

on

STEREO

MONO

SOURCE INPUTS

LEFT AMP

INSERT

RIGHT AMP

INSERT

LEFT OUTPUT

RIGHT OUTPUT

WARNING: 

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
NO USER SERVICABLE PARTS INSIDE.

MODEL MA2355

MADE IN USA

www.rolls.com

SERIAL NUMBER

2355 -

 RISQUE DE CHOC - NE PAS ENLEVER

PHANTOM 

POWER

PRIORITY 

SOURCE 1 MONO 

2 1

Right / Left Output: Spring-loaded terminal for connection to the speakers.
LEFT/RIGHT AMP INSERT: 1/4” Tip-Send, Ring-Return insert jack.
MICROPHONE ONE and TWO: Balanced XLR inputs to be connected to dynamic
or condenser microphones.
DIP SWITCH: Contains the small switches for engaging Mic 1, 2 phantom power,
Source 3 Stereo or Mono, the priority (Talk Over) functions, and the Mono/Stereo
select.
SOURCE INPUTS: Stereo RCA jacks, Channels 1 - 3, for connection to stereo
sources such as AM/FM tuners, cassette players, cd players, or video players.
RECORD OUT: Stereo RCA jacks, contains all mixed signals before the Master
Level controls.

SPECIFICATIONS

MIXER
Input Impedance:

Mic:

 600 Ohms XLR balanced

Source:  22K Ohms RCA
Insert:  22K Ohms 1/4" TS unbal.

Max Input Level:

Mic:

 -14 dBV Mic level Max

Source:  24 dBV
Insert:  24 dBV

Connectors:

2: XLR, 6: Stereo RCA, 3: 1/4" TRS, 1: 1/4” TS

Phantom Power:

+12 VDC

Max Gain:

Mic:

60 dBV

Source: 26 dBV

Tone Controls:

+/-12 dB 100 Hz Bass
+/-12 dB 11kHz Treble

Noise Floor:

Speaker out: -67 dBV
Pre Out: -90 dBV

S/N Ratio:

96 dBV

Priority Attenuation:

60 dBV

POWER AMP
Recommended Load:

8 Ohms

THD + Noise:

.06% typical-82 dBV
120 VAC  50-60 Hz

Weight:

5.5 lbs (2.5 kg)

Size:

19" x 1.75" x 5"
(48cm x 4.5cm x 12.7cm)

2

5

Содержание MA2355

Страница 1: ...ation or maintenance by any person or party other than our own service facility or an authorized Service Center or any use violative of instructions furnished by us This one year warranty is in lieu of all expressed warranties obligations or liabilities ANY IMPLIED WARRANTIES OBLIGATIONS OR LIABILI TIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTIC...

Страница 2: ...MES THE USER HAS A WORKING KNOWLEDGE OF AUDIO ELECTRONICS BALANCED AND UNBALANCED CONNECTIONS AND PROPER SIGNAL LEVEL SETTING INSPECTION 1 Unpack and inspect the MA2355 box and package If obvious physical damage is noticed contact the carrier immediately to make a damage claim We suggest saving the shipping carton and packing materials for safely transporting the unit in the future 2 Please visit ...

Страница 3: ...L MA2355 MADE IN USA www rolls com SERIAL NUMBER 2355 RISQUE DE CHOC NE PAS ENLEVER PHANTOM POWER PRIORITY SOURCE 1 MONO 2 1 Right Left Output Spring loaded terminal for connection to the speakers LEFT RIGHT AMP INSERT 1 4 Tip Send Ring Return insert jack MICROPHONE ONE and TWO Balanced XLR inputs to be connected to dynamic or condenser microphones DIP SWITCH Contains the small switches for engagi...

Страница 4: ...alled upon for too much power it may also be fooled by impedances lower than four ohms which may cause the output stage to overheat and be irreversably damaged Since the MA2355 is convection cooled the unit radiates heat from the front panel and depending on the load demand it may become very hot if drawn upon heavily CONNECTION Inputs Connect low impedance microphones to the Mic inputs If a pagin...

Отзывы: