More and more audiophiles and DIY audio enthusiasts are
discovering the benefits of passive preamps. Why? Because
more often than not, a passive preamp does the essential
job of a preamp (input switching and controlling volume)
while doing the least amount of harm to the audio signal.
OUT
Passive Preamplifier
PP532
PP532
MADE IN USA
MADE IN USA
Volume
1
2
3
4
1
2
3
4
IN 4
OUT
Passive Preamplifier
PP532
PP532
MADE IN USA
MADE IN USA
Volume
1
2
3
4
1
2
3
4
IN 4
Thank you for purchasing the PP532. We hope you enjoy
using the PP532, and that it makes listening to your music
collection rewarding. We sincerely appreciate the opportunity
to build a product for you and participate in your love of qual-
ity music and sound. We love what we do and we’re happy
to help. All Bellari products are hand built in Salt Lake City,
Utah by people who care about high quality music.
The PP532 pre amplifier is a completely passive design with
absolutely nothing added to your audio signal path.
That means NO power required, NO electronics used and
NO distortion will ever be added to your music.
It is the most effective way to reach high-end audio quality,
and you will save enough coin that you can buy the more
expensive speakers you have been eyeing.
The chassis is made from .090 steel, meaning it is 3 times
thicker than most chassis. Four pairs of RCA inputs allow for
connection to all your music sources, and one pair of RCA
jacks to go to your amplifier.
All this and it is 100% Handcrafted in Salt Lake City, UT.
The audiophile in you will approve of the 0% distortion added
and 100% original signal preservation, but the cheapskate in
you will use the savings to buy more gear, of course.
Connection of the PP532 is easy. The rear pannel 1-4 RCA's
connect your input signals. The OUT RCA on the rear pannel
goes to your amplifier or other device. Volume knob sets the
level of the selected signal via the 1-4 front panel switch.
The IN 4 on the front is a 3.5mm (1/8") stereo input in parel-
lel with RCA input #4 on the rear of the unit. It is a great way
to plug your phone into your system without needing accesss
to the back of the unit.
