Rollplay W458AC, Руководство пользователя и инструкции по сборке

Страница: 10 / 26

10
Assemble the Front Wheels
1. Locate the snap pins (14) and large washers (15) from the blister box. Slide the
large washer (15) onto the axle
2. Slide the front wheel (7) onto the axle. Ensure that the side of the wheel with the
slots is facing out
3. Slide the large washer (15) onto the axle
4. Insert the straight side of the snap pin (14) through the hole at the end of the axle
to keep the wheel in place
5. Position the hubcap (9) over the holes on the wheel, and snap the hubcap into
place
6. Repeat sets 1-5 for the other front wheel
16
15
17
4
7
Helpful Tip:
1. Using pliers will make
it easier to remove
the snap pin from the
wheel axle